Meiji Techno TC5000 Series Instruction Manual download pdf (Page 32)

5.0 Troubleshooting

Meiji Techno products are manufactured in Japan under ISO9000 manufacturing

standards. However, if you ever have any difficulty with any Meiji product, feel free to

Meiji Techno America

3010 Olcott St

Santa Clara, CA 95054

800.832.0060

408.970.4799 FAX

http://www.meijitechno.com

Our technical staff is trained to assist you on mechanical or electrical issues you may

have. Problems in regard to specimens, fluorochrome fluorescence, specimen

preparation, specimen staining, etc. are beyond the scope of this manual.

Operational Issues

Please refer to the previous “Operations” chapters which coincide with the observation

mode that you are using.

The most common operational problems include the improper positioning of contrast

accessories, the improper adjustment of right rings or the incorrect condenser installed.

If you are unable to obtain the desired image from the microscope, please refer to the

corresponding chapters of this manual under the proper operation mode: brightfield,

phase contrast, etc.

Electrical Problems

Electrical problems can include:

• The lamp on the microscope is not working.

• No voltage is present.

Check the following probable causes:

• Check that all power cords are properly connected to the right spots.

• Make sure power is actually present at the wall outlet.

• Check to see if there is a fuse is blown.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 41 42

No comments

Meiji Techno TC5000 Series Instruction Manual Page 32