Meiji Techno TC5000 Series Instruction Manual download pdf (Page 30)

4.0 Maintenance and Cleaning

• Disconnect the power cord on your equipment prior to performing cleaning,

maintenance or repair.

• Keep electrical components away from moisture or humidity.

• In warm humid climates, take special care to prevent your equipment from

exposure to fungal growth.

• Clean the microscope after each use. Keeping your microscope clean will insure

its proper operation over its lifetime.

Dust Protection

Be sure to use the supplied dust cover with your microscope after each work session.

Cleaning

Dust and fibers can cause “background fluorescence” during fluorescence microscopy so

keeping your microscope clean can help the overall quality of your work.

Cleaning of Painted Surfaces

Use a soft brush or lint-free cotton cloth to removed dust and loose particles.

Tough dirt can be removed with a water and a mild detergent.

NEVER USE ACETONE OR OTHER HARSH CHEMICALS.

Painted or plastic surfaces should not be tarnished or etched with cleaning agents that are

too powerful.

To clean painted surfaces, use a moistened lint-free cotton cloth with mild soapy water.

Cleaning the Stage

Use a soft brush or lint-free cotton cloth to removed dust and loose particles.

DO NOT USE ACETONE OR OTHER HARSH CHEMICALS, use a moistened lint-

free cotton cloth with a solution of mild soapy water.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 41 42

No comments

Meiji Techno TC5000 Series Instruction Manual Page 30